Click here to confirm the online  D&B ProfileTM  for U-TEK EMI CORP.

Products

EMI Shielding Absorber & Noise Suppression Sheet

Product Name : EMI Shielding Absorber & Noise Suppression Sheet

Product Details
IDA-DATA (pdf.)(687 KB)
Roll Type EMI absorber ( IDA Type )
IDCI series - over 4GHz frequency of use, there are more than 10dB attenuation values ​​of excellent absorption characteristics.
Use silicone rubber material can be very superior mechanical strength and physical properties.
Product Comparison thick or slightly thicker at 4GHz or higher available frequency bands have a very good absorbing performance.
Prevent interference with radar can stealth (invisible), satellite communications can be used to prevent interference with other uses.

RFS-DATA (pdf.)(205 KB)
RF tape (absorption and shield) ( RFS Type )
Can be less than 0.1mm thick, but also has the effect of reducing vibration, the frequency of the absorbing layer is formed tape shielding products.
Including double-sided tape is not greater than 0.15mm thick, multi-layered absorbent layer and the shield layer composed of electromagnetic shielding against electromagnetic waves can be converted laminated tape can be applied to specific needs.
Sometimes, insulation shielded wire can prevent the risk of short circuit boards, cable shielding, impedance matching, anti-static properties can be effective prevention can take into consideration the issue. RF shielding tape layers and combinations, depending on the used under various forms of production and assembly locations.

RFID-DATA (pdf.)(311 KB)
RFID Absorber Sheet 13.56MHz RFID
High-frequency wave absorption material has been widely used in 13.56 MHz frequency, such as ETC, Easy Card and RFID signal recognition devices.
The main purpose is to increase the distance between the signal recognition ability, and sometimes the money card mobile phone or send and receive signals generated by the loop antenna close to the antenna and the conductive metal for the communication with the base station of the communication distance becomes very short.
To solve these problems and create high absorbing material, high-frequency wave absorber according to its characteristics (HF Absorber) will change to a loop antenna specifications.
Absorber is located in the rear of the loop antenna is ideally suited to this form from the problem can be quickly and easily resolved.

UHF-DATA (pdf.)(199 KB)
UHF Absorber 900MHz RFID Absorber
UHF radar absorbing materials used 13.56MHz HF absorbing purposes, such as, RFID equipment uses a frequency that can be applied to this product, such as logistics management.
Products with the system is mainly applied to the 900MHz band, 13.56MHz RFID technology due to absorption of high-frequency (HF) and ultra high frequency (UHF) have different absorption effects and material structure.
So this product is very superior, can make sense to increase the distance, RFID chips can be protected from external shocks better buffering capacity can be easily assembled in the applicable local.

IDSOB-DATA (pdf.)(1.3 MB)
High resistance EMI Absorber ( IDSOB Type )
IDSOB series microwave absorption in the commercial products, has developed into a high heat resistance, strong absorption properties, and uses the same superior silicone rubber resin material having heat resistance, wear resistance, corrosion resistance.
IDSOB series-includes performance are: magnetic shield (magnetic shield), ESD (electrostatic discharge), the use or the line impedance (Z) indicates the adjustment of excellent properties.

IDCI-DATA (pdf.)(228 KB)
HF Absorber ( IDCI Type )
IDCI series - over 4GHz frequency of use, there are more than 10dB attenuation values ​​of excellent absorption characteristics.
Use silicone rubber material can be very superior mechanical strength and physical properties.
Product Comparison thick or slightly thicker at 4GHz or higher available frequency bands have a very good absorbing performance.
Prevent interference with radar can stealth (invisible), satellite communications can be used to prevent interference with other uses.

IDCIM-DATA (pdf.)(240 KB)
Laminated layer and broadband absorber ( IDCIM Type ) IDCIM SERIES- It is the products change from IDCI series.
By the laminated or more layers of material combination of microwave absorbing material.
This particular technology products, perform a specific frequency band requires a very high return loss, or in a very wide frequency band used to get better absorbing properties.
Multilayer stacking and the applicable frequency range to be provided by the customer to develop the product SPEC.

TOP